Cutters

[Parkster]

Has anyone got anything good or bad to say about the new Xikar XO cutter?

I'm still toying with the idea of purchasing one.

Sent from my F8331 using Tapatalk

[MaytagMan]

I haven't used one myself, but I have heard that they di a great job like their other cutters. Sorry I don't n't have more details... I'll keep my eyes open for someone using one so I can either ask then about it or knock them over their head, take their lighter, and send it to you! ?????

[Jimmie the Mum]

I strictly V cut unless the ring gage is too big, then I give the cigar to the guy next to me.

[Parkster]

Hahahaha

Sent from my F8331 using Tapatalk

[Jimmie the Mum]

Review:
http://www.cigaraficionado.com/webfeatur...tter-19032

Xikar's new XO cutter generated a lot of excitement at this year's IPCPR trade show, not only for what it is, but also for what it isn't.
Ever since Xikar brought its original teardrop-shaped cutter to market in 1998, the ergonomic, butterfly-blade design has been the company's clear signature product, with several iterations and finishes having been added over the years. With the XO cutter, though, the Kansas-city based company opted to not trot out yet another teardrop cutter, but instead to go with a distinct round shape.
It's a bold design choice, and after effortlessly cutting dozens of cigars with the new XO, one that we at Cigar Aficionado are happy the company made.
The body of the XO cutter appears to be plastic, but it is in fact anodized aluminum. This makes the cutter light enough to easily carry in one's pants pocket without being cumbersome, and gives the XO a bit more durability.
The XO cutter's aperture is about an inch wide, or 64 ring gauge, making it large enough to snip the cap of cigars up to 70 ring gauge. The dual blades are released from the round body via a spring-loaded release button atop the cutter. When pressed, the blades shoot out the sides, and suddenly the round cutter's silhouette resembles a TIE Fighter craft from the Star Wars films.
 

These blades operate in perfect harmony thanks to an internal epicyclic gear system housed inside the XO's body, whose mechanisms can be seen operating thanks to two slits in the cutter's body.

Photo/James LaPorte
The XO cutter's aperture is about an inch wide, or 64 ring gauge, making it large enough to snip the cap of cigars up to 70 ring gauge.

Photo/James LaPorte
When the spring-loaded release button is pressed, the blades shoot out the sides, and suddenly the round cutter's silhouette resembles a TIE Fighter craft from the Star Wars films.

These blades operate in perfect harmony thanks to an internal epicyclic gear system housed inside the XO's body, whose mechanisms can be seen operating thanks to two slits in the cutter's body.

Photo/James LaPorte
The XO cutter's aperture is about an inch wide, or 64 ring gauge, making it large enough to snip the cap of cigars up to 70 ring gauge.
PreviousNext
These blades operate in perfect harmony thanks to an internal epicyclic gear system housed inside the XO's body, whose mechanisms can be seen operating thanks to two slits in the cutter's body. (Just be sure no tobacco bits end up inside.) These planetary gears synchronize the blades, aiding users not only by allowing them to better line up the cut before the final snip, but also evenly distributing pressure to each blade.
Unlike other Xikar cutters, which use 440c stainless-steel blades, the XO cutter is built with 4034 stainless steel. According to Rob Lembke, vice president of engineering & process excellence at Xikar, this was yet another design decision.
"The XO cutter design requires the blades to be a thickness of steel that isn't as widely available as others," said Lembke. "Also, given the gear-driven design, other factors had to be considered besides those typically thought of in cutting-only applications."
According to Xikar, more than three years of research and development went into the XO cutter, and it shows. The sensation of cutting a cigar with the XO is tactile and incredibly satisfying. There is a little play to the blades when they are spread from the body, but this doesn't affect the smooth cutting action.
The price point may seem high ($100 for the black, bronze and gunmetal version; $120 for the blue with black blades finish), but remember the cutter is backed by the company's lifetime warranty.
Taking that into consideration, and it seems a fair price to pay for a cutter that delivers the precision of scissors in a compact, easy-to-use design.
The XO cutter will hit stores later this month, and you can visit xikar.com for more information.

[Parkster]

Thanks Jimmie.

I've read a couple of reviews that also give it a bit of a dig if I'm honest, too many moving parts being one of the issues and not intuitive to use being another.

I'd taken in to account that not everyone is a Xikar fan, just like some of the reviews that hail it as the future of cutters being from over enthusiastic Freeby recipients.

The lifetime warranty is a big draw, but, I still wanted to fish for info from SC folks whom I hold in regard for their credibility if it had been fiddled with by any of the group.

I have a Xikar punch, more teardrop cutters of theirs than I care to admit to Mrs P about and I have your V Cutter from my last visit.... Still have no idea how I ended up with it, the baggy and straw., so I'm not in desperate need of a new cutter..... But.... You know how it is.

Sent from my F8331 using Tapatalk

[nayslayer]

i tried the first release in a shop. The gear movement wasn't very smooth at all. The later revision seems really smooth. I didn't cut my cigar with either, but effed with it a bit.

[Parkster]

i tried the first release in a shop. The gear movement wasn't very smooth at all. The later revision seems really smooth. I didn't cut my cigar with either, but effed with it a bit.

If you were to compare it to the natural/comfortable ease of use of their tear drop design (let's be honest it is the benchmark) how would you rate or compare?

Sent from my F8331 using Tapatalk

[Jimmie the Mum]

So that's where my V cutter went. I looked all over for it, thouight I left it on top of the car.

I picked up a new one at the PA herf, speaking of which, it's gonna be time to set a date soon (the 10th herf)..

[Parkster]

So that's where my V cutter went. I looked all over for it, thouight I left it on top of the car.

I picked up a new one at the PA herf, speaking of which, it's gonna be time to set a date soon (the 10th herf)..

Hmmmmm

I've not shared a traditional cigar and dram combo with you for longer than it should have been.

Sent from my F8331 using Tapatalk