12-16-2010, 06:29 PM
Well the Zombies are getting bigger and bigger these days so I decided I needed more firepower! I went fancy too!
Patriot Ordinance Factory in a 7.62 X 51 NATO! The barrel is a Rock Creek rifled barrel, fluted 1 in 10 twist. Its hammer forged 4150 Mil-B-1159F Vanadium alloy. MACHINE GUN RATED and 2 times harder than milspec. Torture tested at 10,000 rounds and passed with flying colors.
She is a gas piston. Bolt and Carrier are Nickel Teflon plated. Cool to the touch! Upper receiver is NP3 coated and black anodized. Lower receiver is billet machined 7075-T6 aircraft aluminum allow and the trigger is a short break 3.5 lbs Timney trigger. Vltor Clubfoot stock.
Continuous monolithic top rail and guaranteed half in minute of angle groups with Black Hills factory match 168 grain ammo. Can't wait to load this one up with custom re-loading.
![[Image: NYC2010072.jpg]](http://i153.photobucket.com/albums/s206/mn654/Guns/NYC2010072.jpg)
![[Image: NYC2010078.jpg]](http://i153.photobucket.com/albums/s206/mn654/Guns/NYC2010078.jpg)
![[Image: NYC2010077.jpg]](http://i153.photobucket.com/albums/s206/mn654/Guns/NYC2010077.jpg)
![[Image: NYC2010076.jpg]](http://i153.photobucket.com/albums/s206/mn654/Guns/NYC2010076.jpg)
![[Image: NYC2010075.jpg]](http://i153.photobucket.com/albums/s206/mn654/Guns/NYC2010075.jpg)
![[Image: NYC2010074.jpg]](http://i153.photobucket.com/albums/s206/mn654/Guns/NYC2010074.jpg)
![[Image: NYC2010073.jpg]](http://i153.photobucket.com/albums/s206/mn654/Guns/NYC2010073.jpg)
Patriot Ordinance Factory in a 7.62 X 51 NATO! The barrel is a Rock Creek rifled barrel, fluted 1 in 10 twist. Its hammer forged 4150 Mil-B-1159F Vanadium alloy. MACHINE GUN RATED and 2 times harder than milspec. Torture tested at 10,000 rounds and passed with flying colors.
She is a gas piston. Bolt and Carrier are Nickel Teflon plated. Cool to the touch! Upper receiver is NP3 coated and black anodized. Lower receiver is billet machined 7075-T6 aircraft aluminum allow and the trigger is a short break 3.5 lbs Timney trigger. Vltor Clubfoot stock.
Continuous monolithic top rail and guaranteed half in minute of angle groups with Black Hills factory match 168 grain ammo. Can't wait to load this one up with custom re-loading.